Upgrading The Axle On A Harbor Freight 48"x 96 Trailer
Question:
Hi, I have an older harbor freight 48” x 96” utility trailer. I wish to upgrade the axle so i can put 12” tires on it. Would this Dexter axle compatible to my trailer? Can i use the existing u bolt and hub? Thanks.
asked by: Al H
Expert Reply:
To determine fit, the width of your trailer should be the same as the spring seat center to center measurement on the axle (48 inches). The # T20BTR-6048 lines up fine there. If these bearings fit your hubs, inner bearing L44649 and outer bearing L44649 would be compatible with this axle. The hubs on this axle should accommodate 12 inch wheels with a 4 on 4 bolt pattern. I would go ahead and replace the u bolts to prevent any potential thread misalignment.
The U-Bolt Kit for Mounting 2,000-lb # APUBR-10 should work fine for you.
I have included a link to a video review of the axle for you.
Products Referenced in This Question
U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 2000 lbs
- Round Axle - 1-3/4 Inch
- 3/8 Inch Diameter
- 4-1/4 Inch Long
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with Standard Spindles - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Q&A: Upgrading Trailer Tires and Wheels For Highway use on Harbor Freight 4x8 Folding Trailer
- Q&A: Compatibility of Harbor Freight Trailer with Larger Tires
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range C
- Video: Redline Round Trailer Axle U-Bolt Mounting Kit Review
- Shop: U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Q&A: Is Trailer Suspension U-Bolt Plate Supposed to Bend and What is Torque Spec for 3/8" U-Bolts
- Shop: Replacement Black Handle for Ram Sidewind Jacks
- Q&A: Replacement Leaf Springs for Harbor Freight Folding Trailer
- Q&A: Replacement Slipper Leaf Spring for 4 x 8-Foot Harbor Freight Folding Trailer
- Search Results: 1000 lb axle
- Search Results: 1000 lb trailer axle kit
- Search Results: 2000lb axle
- Q&A: What is the Largest Size Wheel that Can be Used with a 4 on 4 Inch Bolt Pattern
- Q&A: Do Hubs Come Pre-Installed on Dexter 2,200 Pound Trailer Axles
- Video: Kenda Tires and Wheels - Tire with Wheel - AM3H410 Review
- Video: Dexter Trailer Idler Axle w/ EZ Lube Hubs Installation
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Article: Trailer Tire Sizing
- Shop: Dexter Trailer Idler Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Rhino-Rack Fishing Rod Carrier - Locking - 11 Fishing Rods
- Article: How to Determine Tire/Wheel Diameter
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 6,000 lbs
- Search Results: 20.5 leaf spring
- Search Results: st175 80r13 tire
- Search Results: hubs