Tor-Flex Lift Kit that Fits 2015 Little guy Silver Shadow 5x10

Question:

I just need a 7 pin harness with out a brake controller just for lithts i not planning to tow the trailer with the jeep just to move it out from my garage because i already have a tow vehicle. What you recommend! Thanks

asked by: Raymond

Helpful Expert Reply:

Can you get me the brand of axle you have? I believe you might have an AL KO axle which we won't be able to help you with but if you have a Dexter or Lippert torsion style axle we can get you a lift for it.

expert reply by: Jameson C

Raymond

10/14/2019

It's a dexter #9!!

Jameson C.

10/14/2019

Nice! That means the lift kit you need is the K71-723-01 which fits your Torflex #9 axle. Then for a 15 inch wheel and tire you could use the Goodyear Endurance part # 724861519A which has an outer diameter of 27.13 inch which would be a better size than a 30 inch for your smaller trailer!

Raymond

10/15/2019

I also need a 7 pin hitch harness for a 2001 jeep wrangler tj . I don't have any wiring harness at the moment. What you recomend?

Jameson C.

10/15/2019

To install a 7-way on your 2001 Jeep Wrangler the first thing you need is a 4-way to provide the taillight circuits. For that you'd want the part # 118409 which installs easily by plugging inline with the taillight connectors of the vehicle. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller. For a brake controller I would recommend the part # TK63VR which has an inertia sensor built into it so that it can sens how hard you are applying the vehicle brakes and apply the same braking intensity for the trailer brakes.