Can Trailer Axle be Replaced With 1 Larger Hub-Face Measurement
Question:
WIll this axle work if the spring center is the same as mine but the hub face to hub face measurement is 1inch longer on this axle? Also what is the overall length?
asked by: Kylie
Expert Reply:
The Dexter Trailer Idler Axle Beam with EZ-Lube Spindles # T20BTR-EZ-7258 should work great for your application! The only time that having your hub-face sit out an extra inch would be a problem is if that made your trailer tires touch fenders that you might have on the trailer. If your trailer doesn't have any fenders then you won't have any problems going this route!
Please note that if you only have 1 axle this is alright. If you have more than one axle then you'd need to swap out all of your axles to match.
Product Page this Question was Asked From
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Locating Replacement Dexter P-15 Axle on Trailer
- Q&A: Recommended Trailer Axles and Suspension for BBQ-Smoker Trailer with Pit Weighing 3,000-3,500 lbs
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Comparing Different Hanger Kits ffor Single Axle Trailer with Double Eye Leaf Spring
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Hitch for a 2024 Honda CR-V
- Q&A: Are the Gooseneck Hitch Balls the Same for a GM and Ram Puck System
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Stability Control for Heavy Duty Vehicles
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Article: Trailer Maintenance Schedule