If Bearing Buddy Overfills Trailer Hub and Blows Out Seal Is it Okay to Still Use
Question:
Looking for a double cup seal, shore lander p/n is 4410120. New ones dont hold.
asked by: Robert B
Helpful Expert Reply:
If you blow out a grease seal on a trailer hub by overfilling it with grease using a Bearing Buddy the seal would not still be okay as it would need to be replaced but the Bearing Buddy like the # BB1980A-SS would still be fine.
It's very easy to overfill trailer hubs with Bearing Buddies as many have found. If you are in need of a replacement seal let me know the number that's on it or the inner and outer diameter and I can get you set up with a replacement. I also attached a link to this page that has all of the ones we offer with filters you can pick from that will allow you to select what you have and see what you need.
Products Referenced in This Question
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of Timken Trailer Bearings Races Seals Caps - Bearing And Race Kit - TMK52VR
- Q&A: Is Kenda 4.80-12 Wheel and Tire part # AM30590 Sold Individually or in Pairs
- Q&A: Should Trailer Tire PSI Ratings Change Based On The Load
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30590 Review
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Search Results: tang washer
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Search Results: lug nuts
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Q&A: Are 480x12 Trailer Tires the Same as 4.80x12 and Will a 5.30X12 Fit in Place of a 4.80X12
- Q&A: How To Find Correct Bearing Kit for a Bass Tracker Trailer
- Shop: Americana Trailer Wheel Lug Nut - Stainless Steel - 1/2"-20 - Qty 1
- Shop: Lionshead Trailer Wheel Lug Nut - 1/2"-20 - Stainless Steel - Qty 1
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Search Results: wheel bearing kit
- Q&A: Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?
- Q&A: Troubleshooting Overheating Hubs on a Trailer With New Bearings and Grease
- Video: Rhino-Rack Sunseeker Awning Review
- Search Results: 145 80 r12
- Search Results: l44649
- Search Results: hub flange
- Search Results: cotter pin
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Bearing Buddy Trailer Bearings Races Seals Caps - Seals - BB60011 Review
- Video: TruRyde Trailer Bearings Races Seals Caps - Caps - DC200L-DCRP Review
Robert B.
10/7/2019
Looking for a double cup seal, shore lander p/n is 4410120. New ones dont hold.