Brake Controller Alternatives for 2019 Toyota Tundra
Question:
need a brake controller and wire adapter to replace factory brake controller
asked by: Poncho H
Expert Reply:
The 2019 Toyota Tundra doesn't have a brake controller connector under the dash, so if you were to install a standard, old-school aftermarket controller, you'd need to hardwire it in.
The easiest alternative to that would be the Curt Echo, part # C51180. As long as your existing 7-way trailer connector has a functional 12-volt feed, the brake controller would be a plug and play installation. The brake controller would use your smart phone through an app as the display/ in-cab controls. The nice thing about the Echo is that you won't have to drill holes in the underside of the dash of your new truck, and there won't be a box hanging from the dash to bash your knee on.
If you'd feel more comfortable with something like a traditional brake controller, the install shouldn't be too difficult as the vehicle already has a factory brake controller. Your first step would be to pull the factory controller from the dash to access the wiring harness that plugs into the rear of it. Use a circuit tester like # 40376 and probe the wires feeding the controller until you find the 12-volt power feed. This wire will connect to the black wire of the brake controller you use. Another wire should show voltage only when the brake pedal is pressed, this would connect to the red wire of the controller. Then, locate the wire that shows power only when the brake controller's manual brake switch is actuated. This wire connects to the blue brake controller wires. The white brake contoller wire would ground to the vehicle, preferably to the negative battery terminal.
As far as a brake controller goes, you could indeed go with a standard brake controller such as the # 90195 Tekonsha Prodigy P3 but given that yours is a new vehicle, I'd personally choose the Redarc # RED44FR. The Redarc Pro Elite mounts under the dash, out of sight and features one dial that can be dash mounted using an un-used accessory switch knockout. A replacement switch bezel for the Tundra is available as part # 331-TPSI-002.
Products Referenced in This Question
Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob
- Accessories and Parts
- Trailer Brake Controller
- Control Knob Mounting Panel
- Vehicle Specific
- Redarc
more information >
Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Dash-Mounted Knob
- Hidden
- Up to 3 Axles
- Indicator Lights
- Redarc
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Does the Tekonsha P3 Trailer Brake Controller Turn Off or Stay On All the Time
- Q&A: Parts Needed to Add 7-Way & Brake Controller on 2023 Kia Sportage
- Q&A: Wiring Configuration for Tekonsha Prodigy P3 Trailer Brake Controller 90195
- Q&A: Comparison of Tekonsha Prodigy P3 and Primus IQ Brake Controllers
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Q&A: Parts Needed to Install 7-Way/4-Way on 2024 Kia Telluride with LED Taillights