Fit of Dexter E-Z Flex Heavy Duty Equalizer on Coleman 202RD Travel Trailer
Question:
I have a Coleman Lantern 202RD. It is a late 2017. I have been looking to improve the suspension since I take a lot of back roads. I have been communicating with MORryde about the CRE3000. There are a lot of measurements to take and some of mine seem right on the edge of the minimums. I would like to replace the shackles and the equalizer but dont want to buy something overly complicated or questionable fit. So now I am looking at E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle - 5-5/8 Equalizers Item # K71-652-00 Is there any way you can tell me if this should fit my Coleman 202RD travel trailer? Or make a recommendation. Thanks
asked by: Patrick L
Helpful Expert Reply:
The easiest way to determine if this will fit on your Colemen Travel Trailer is to measure your existing equalizer. The Dexter Axle # K71-652-00 EZ Flex is designed to replace their 13-104 equalizer. The two bottom holes should have an approximate 5-3/4 inch distance measured center hole to center hole between the holes where the shackle links mount and the hole where the equalizer mounts to the spring hangers as well as the holes where the shackles mount should be 9/16 of an inch in diameter. The height between the two lower holes an the upper hole should be 2 inches (see the provided diagram). The existing spacing of your axles should be approximately 33 inches, center to center.
I've linked you to a product description/install video that you might find helpful.
Product Page this Question was Asked From
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 5-5/8 Inch Long
- Tandem Axle
- Dexter
more information >
Continue Researching
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Q&A: Installation Information for the Replacement Cables for Enclosed Trailer Ramp Spring # ERS160D96
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Q&A: Will the Draw-Tite Trailer Hitch Fit a 2022 Volvo XC90 Recharge
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Harvest Hosts
- Article: What To Look For When Buying Ratchet Straps
- Article: Where to Position the Trailer Axle?
- Article: Must Have RV Accessories that Will Make or Break Your Trip