Timbren Axle Less Kit for Sea Lion SK-20-2200 Over Torsion Axle
Question:
I am looking to replace leaf springs and axle with a torsion axle and 13inch wheels with radials. Can you give me a suggestion? I currently have 5x4.5 hubs with new bearings on a 2inch square axle I believe to be original. Thanks
asked by: John C
Expert Reply:
We have the Timbren Axle Less kit part # A35RS545 which is similar to a torsion setup that comes with hubs that have a 5 on 4-1/2 inch bolt pattern as well. In general the axle-less kits have a better ride quality than torsion axles and also has better ground clearances as well so this would be what I would recommend over the torsion setup.
I attached a review video for this for you to check out as well.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Idler Hubs, Bearings, Seals and Grease For a 2015 V22L ShoreLand'r Boat Trailer
- Q&A: Does Bearing Buddy Seal Kit # BB60002 Fit 3,500 lb Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Q&A: Axle Upgrade for my Harbor Freight 1720 Utility Trailer
- Q&A: Can 3,500 Lb Hub be Used to Replace 2,000 Lb Hub with Same Size Bearings
- Q&A: Proper Spacing Between the Hub Face and Spring Center Locations for 7,000-lb Triple Axles
- Q&A: Replacement Axle-Less Trailer Suspension Square Axle 49.5 Hub Face and 38.5 Spring Center
- Q&A: Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
- Article: 2023 Holiday Must Haves
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Determining Trailer Tongue Weight