How Does the Valterra Shower Drain Install?

Question

Question:

Does it go on top of shower base or bottom?

asked by: GAR

0

Expert Reply:

The Valterra Shower Drain # A01-2012VP will sit on top of the shower base and either thread into a 1-1/2 inch P-trap or, using the included collar, will press into a 1-3/4 inch pipe that doesn't have any threads. You may want to add some silicone caulk like # 0160297 to make sure that you've got a good seal on the drain.

expert reply by: Erik B

0

Answer 1

Yes, the rubber seal of the Valterra Shower Drain #A01-2012VP that you referenced goes between the top of the tub drain hole and the bottom of the flange of the drain and then the other seal goes between the bottom of the tub and the fastening nut…

view full answer...

Answer 2

To install the Valterra Shower Drain #A01-2012VP you may need some silicone caulk, like #0160297. But it isn't normally necessary.

view full answer...

Answer 3

We do have a nice selection of shower drains available. The Better Bath RV Shower Pan #LC342922 referenced in your question can be paired with a standard drain like the Valterra #A01-2012VP. This drain has a 2-1/2 inch steel flange and fits a 1-3/4…

view full answer...

Answer 4

The gasket goes on top of the shower pan when you install the LaSalle Bristol RV Shower Drain w/ Grid Strainer item #34465PR227G. You can use silicone caulk like item #0160297 around the base when you install the drain to help prevent leaks.

view full answer...

Answer 5

Please take a look at these options, the LaSalle Bristol RV Shower Drain, #34465CAR227G, ##34465WAR227G, #34465PR227G. These all have a threaded section of 1-7/8". Note product review videos please.

view full answer...

Answer 6

The main difference between the Dometic 310 Part-Timer RV Toilet #DOM57FR and the Dometic 311 Part-Timer RV Toilet #DOM67FR is that the 310 is standard height (20" tall) and the 311 is a low profile (15-1/2" tall). Both toilets will mount…

view full answer...

Answer 7

Replacement toilet floor flanges are universal so it will work, but you can determine the correct one based on the threading of your current flange. They will work with 3" pipes which you need to have as well. - Male Thread: Replacement RV…

view full answer...

Answer 8

The LaSalle Bristol RV Shower Drain w/ Grid Strainer - 1-7/8" Diameter - Parchment #34465PR227G you were looking has a 1-3/4" interior drain diameter so it will need a 1-3/4" PVC pipe to connect to it, and not a 1-1/2" as you…

view full answer...

Answer 9

The heating element on your Atwood model GC10A-4E water heater (our part #AT94022) should be on the backside of the unit, towards the bottom of the tank. It will actually be behind the gas line assembly, which will need to be loosened and moved out…

view full answer...

Answer 10

The TorkLift GlowStep Revolution Scissor Steps #TLA8004 that you referenced are designed to fit entry heights on RVs that are between 32-1/2 and 44 inches which which might be a little higher than what you have on your 2018 Lance 1475 based on the…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

How Does the Valterra Shower Drain Install?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching