Could Hub with 1993 Jeep Wheel Bolt Pattern be Used on Military Trailer

Question:

Im building an TC1 Camper for my M100 and I want to change the wheels to have electric brakes and utilize my 1993 jeep tires. Can you help?

asked by: Scott B

Expert Reply:

A 1993 Jeep Wrangler wheel bolt pattern is 5 on 4-1/2 inches which is a standard trailer wheel bolt pattern so we are off to a good start. That said now we have to determine if there's a hub that's going to fit your trailer axle that has the correct bolt pattern like you need.

In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.

If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.

You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.

expert reply by: Jameson C