Looking for Grease Cap with Zerk Fitting with an Outer Diameter of 2.02 inches
Question:
in need of axle grease cap with zerk... OD 2.02 inches
asked by: Talib A
Expert Reply:
It sounds like you are looking for a bearing protector style of grease cap. We have a variety of bearing protectors in several different sizes but none with an outer diameter of 2.02 inches. The bearing protectors closest to your OD measurement of 2.02 inches is either going to be 1.98 inches or 2.047 inches.
Bearing Buddy grease caps are made both with and without threads so you'll want to check your hub bore to see if it is threaded or not and while you're at it, confirm the number stamped on the inside of your outer race (see photo).
The 1.98 inch Bearing Buddy Protectors like # BB1980A are by far the most common and typically found on 2,000-lb, 2,500-lb and 3,500-lb Dexter axles. They are also available in stainless steel as part # BB1980A-SS, great for marine applications. These are designed to work with outer bearing race number L44610.
For a Bearing Buddy Protector that will fit a 2.047 inch hub bore, you can use # BB2047 or # BB2047SS for stainless steel. These are designed to work with outer bearing race number 07204.
I have included a link to all of the available bearing protectors we offer so you can browse through them and narrow down your selection using the filters on the left.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Bearing Buddy Bearing Protectors - Model 2047 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.047 Inch
- Bearing Buddy
more information >
Bearing Buddy Bearing Protectors - Model 2047SS - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.047 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 1.99 Inch O.D.
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Is Movement of Armature Arm of Trailer Brake Assembly Normal
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Leaf Springs and SumoSprings for 2020 Grand Design Imagine 2500RL
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Q&A: Replacement 12-1/4 Inch x 3-3/8 Inch Braking Assembly with Four Bolt Brake Mounting Flange
- Article: Trailer Maintenance Schedule
- Q&A: What is the Best Grease for Trailer Bearings
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Q&A: Recommended Shocks and Equalizer Upgrade For a 2017 Grand Design Imagine 2600RB Travel Trailer
- Q&A: Correct Replacement for TDE 46210 Trailer Hub