No Power To Trailer Running Light Pin on a 2012 Ram 3500
Question:
I have no power at the running light terminal on my 2012 ram 3500. All other lights work. No running lights on trailer. How do I fix this.
asked by: Buddy G
0
Expert Reply:
The trailer running light circuit or "Trailer Tow Lamps/Park Lamps" is located in the engine bay fuse box. It is a blue 20 amp fuse in the J14 cavity. If you do not have power to the running light pin on the trailer connector then this would be the first thing I check. If the fuse is still good then that means you have a wire short in between the trailer connector and fuse box.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Checking Trailer Lights Without Hooking Up to Vehicle?
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Parts Needed to Flat Tow 2023 Jeep Gladiator
- Article: Determining Trailer Tongue Weight