Replacement Axle for 1990's Karavan Trailer
Question:
I need to replace the axles on my boat trailer. I measured center to center on the tires and have a measurement of 89 inches. The spring centers are 70. Its a square tube axles with a small drop. Basically the spindles are mounted on the top of the axle. I cant seem to find a suitable replacement. Any suggestions?
asked by: Jason B
Expert Reply:
The best option we can offer you is the Dexter Trailer Axle Beam part # 8327812 which has a 3,500 lb capacity and E-Z Lube feature. This axle has the same hub face length of 89" and drop of 4" that you were looking for. The spring center is set at 74" yes but you can move these inward to match your 70" spring center no problem. In regards to shape, square vs round this will also not be an issue. The u-bolts would be different yes but you would need to replace these when removed from the axle anyway. I recommend the CE Smith U-Bolt Kit part # CE23002.
Please note the axle you have now is not very common which might be why you are having a hard time finding an exact replica but the above option will work for you. If you don't already have a 3,500 lb axle then most likely you will need new hubs as well, the Dexter Trailer Idler Hub Assembly part # 84545UC1-EZ.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Trailer Suspension Parts
- U-Bolt Kits
- Boat Trailer
- Snowmobile Trailer
- 3500 lbs
- Round Axle - 2-3/8 Inch
- 1/2 Inch Diameter
- 5-1/2 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- Drop - 4 Inch
- Dexter
more information >
Continue Researching
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: A/C Unit Recommendation for my Enclosed Trailer With Heat Strip
- Q&A: Can the Spring Seats Be Moved on the Dexter 3,500 LB Drop Axle
- Q&A: How to Tell if a Trailer Spindle is Damaged or Needs to be Replaced
- Q&A: Replacement Suspension Parts for a 2016 Grand Design Imagine 2600RB
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Removing and Replacing Trailer Spindles
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Q&A: How to Determine Between 5 on 4-1/2 and 5 on 5 Bolt Patterns for Hub Covers
- Q&A: How Loud is Advent Air Low Profile RV Air Conditioner
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Choose the Right Trailer Hitch Class
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub