Aries Automotive Grille Guards 5042-2 Mounting Kit Availability for 2001 Dodge Ram 3500

Question

Question:

I am in search of a mounting hardware kit to install the 5042-2 on my 01 Ram 3500 pickup. Which kit do you recommend? Thanks,

asked by: Dustin T

0

Expert Reply:

The correct install hardware replacement for the Aries grille guard part # AA5042-2 you mentioned which does fit your 2001 Dodge Ram 3500 is the part # AABRKT-5042. This would be all that you'd need to install the guard!

expert reply by: Jameson C

0

Answer 1

If you're wanting to install the Aries Grille Guard #AA5042 on your 2001 Dodge Ram Pickup it comes with the hardware. If this is the grill you have and you misplaced the hardware then here is the replacements #AABRKT-5042.

view full answer...

Answer 2

Thanks for reaching out! It looks like your 2000 Dodge Ram has the Aries Grille Guard #AA5042 which means you need the Replacement Installation Hardware #AABRKT-5042.

view full answer...

Answer 3

I checked with Westin who makes the Sportsman Grille Guard and there actually are no kits available that are going to fit your 2001 Dodge Ram 2500. Aries does make a grille guard, the Aries Grille Guard #AA5042 that looks really similar to the Westin…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 9

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 10

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Aries Automotive Grille Guards 5042-2 Mounting Kit Availability for 2001 Dodge Ram 3500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching