Back of Hub Dimensions for 60" Long Dexter Axle
Question:
Im building a tear trailer and want to size it to completely fit within the clear dimension of the axle. I only see a dimension between leaf springs and hub face. Can you provide a dimension between the inside face of the hubs on a standard 60inch axle?
asked by: Kwesi A
Expert Reply:
From the back of one hub to the back of the other hub for the 60" Long Dexter Axle # T20BTR-6048 will measure about 56-1/4".
I did notice in the picture you submitted you have dimensions that are closer to a 72" axle like part # T20BTR-EZ-7258. For this axle the backs of the hubs will be about 68" apart.
Please note that this ca vary depending on the axle and hubs that you use. If there is a specific axle on our site that you are interested in let me know and I can get some measurements for you.
![Jon G](https://images.etrailer.com/static/images/catg/people/1086_tn.jpg)
Products Referenced in This Question
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with Standard Spindles - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-G-EZ-1K Review
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Shop: Dexter Trailer Idler Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Connector
- Search Results: grease buddy
- Search Results: hub assembly
- Search Results: greaseless hitch ball
- Search Results: ball
- Video: Trailer Hitch Installation - 2015 Buick Lacrosse - Curt
- Video: Trailer Hitch Installation - 2011 Buick Lacrosse - Curt
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 60" Long - 2,000 lbs
- Shop: Trailer Hitch
- Shop: Vehicle Tow Bar Wiring
- Shop: Curt RockerBall Anti-Rattle Towing Kit - 2" Ball - 8-1/4" Long Mount - 7,500 lbs
- Shop: Mounting Brackets for Trailer Fender - 8" to 12" Wheels - Pre-Galvanized Steel - Qty 2
- Shop: Powerbuilt Deluxe Bearing Packer
- Q&A: How to Measure to Pick Out New Axle for a Harbour Freight Trailer
- Video: Dexter Axle Trailer Axles - Leaf Spring Suspension - T20BTR-6048 Review
- Video: CE Smith U-Bolt Kit for Round Trailer Axles Review
- Search Results: axel kit
- Search Results: ce23000
- Search Results: spring leaf
- Article: Trailer Tire Sizing
- Q&A: How to Select Replacement Hubs for 1970s Dilly Trailer with 4-Lug Hubs
- Article: Most Popular Wheel Bearings
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Q&A: How to Determine Tire Size on Jayco StarCraft Pop-Up Camper Trailer
- Q&A: What is the Difference Between Double Eye Leaf Springs and Slipper Leaf Springs