Does Trailer Idler Hub Assembly for 2,500 lb Axles Fit 1 Inch Straight Spindle
Question:
So in an above answer, you say that the I.d. of the bearing is 1.063 and this will fit a 1 inch straight spindle??? I have a 1 inch straight spindle...are you sure the bearing will fit?
asked by: Mike
0
Expert Reply:
The Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 # TA88545-2 uses inner and outer bearing # L44649, which has a 1.063 inch inner diameter and does fit what is commonly referred to as a 1 inch straight spindle.
expert reply by:
Kyle S
0
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Sway Bar for a 2024 Chevy Silverado 3500 HD Dually
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Hubs for a Snowmobile Trailer With 8 Inch Wheels
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Trailer Idler Hubs With L44649 Inner and Outer Bearings And 1-1/4 Grease Seal
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Replacement Hubs for a Tiedown 11029 Boat Trailer
- Q&A: Recommended Grease Seal w/ a 1.25 ID and a 1.98 OD
- Q&A: How Can I Increase My Enclosed Trailer Maximum Payload Weight Capacity?
- Q&A: Recommended Replacement Hub for Dexter 8-91A
- Article: Stability Control for Heavy Duty Vehicles
- Article: How to Mount a Truck Bed Camper
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub