Slipper Spring Recommendation for Trailer that Weighs 2,000 lb

Question:

I have a 2000lb trailer with 32 in hook end slipper springs that are almost straight, the measurements from center to center of the hanger bolts is 30 inches, what length spring do I need?

asked by: Mike S

Expert Reply:

The most important factor when replacing leaf springs on a trailer is to match the capacity of the springs with the capacity of the trailer axle. So for a slipper spring with a 2,000 lb axle capacity what you'd want is the part # SP-179275. This is considerably shorter than what you mentioned having so you will need to move the hangers of your setup to accommodate this spring as it measure 25-5/8 inches overall and 22-11/16 inches from the bolt center to where it mounts.

expert reply by: Jameson C