What Is Considered Tongue Weight When Determining Best Weight Distribution System For My Trailer
Question:
How much do the heads weigh? all else being the same bars, brackets etc... equalizer 14k vs 12k head weight
asked by: Rick K
Expert Reply:
The Equal-i-zer Weight Distribution Systems 12k head for part # EQ37120ET weighs around 22 lbs and the Equal-i-zer 14k Weight Distribution Systems head for part # EQ37140ET weighs around 25 lbs. However, when calculating tongue weight for a weight distribution system you would not add the weight of the system into the calculations.
To choose a weight distribution system you want to go by the total weight of the setup. You would need to calculate the total tongue weight of the trailer when it is loaded and ready to tow. Then add any weight you may have behind the rear axle of the vehicle. You want a weight distribution system that is designed for a range of tongue weights where yours falls in the middle. If the WDS system is overrated for the trailer it will cause a stiff and unpleasant ride. If the WDS system is underrated for your trailer it will not be effective for distributing the weight and controlling sway.
I have attached help articles to help you determine your tongue weight with a scale like part # e99044.
If your tongue weight ends up being between 1,000 lbs - 1,400 lbs- The Equal-i-zer Weight Distribution System w/ 4-Point Sway Control part # EQ37140ET is the best option for you.
If your tongue weight ends up falling in the middle of 800 lbs - 1,200 lbs The Equal-i-zer Weight Distribution System w/ 4-Point Sway Control part # EQ37120ET is the best option for you.
Both of these options allow for backing up, come with all of the components of the system except for a thin walled socket which will be needed for installation purposes part # ALL643216.
Products Referenced in This Question
1-7/8" 12pt Thin Walled Socket - 3/4" Drive - Chromium-Vanadium Steel
- Hand Tools
- Ratchets and Sockets
- Sockets
- SAE
- 3/4 Inch Drive
- 1-7/8 Inch
- Alloy Steel
- Powerbuilt
more information >
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- Equal-i-zer
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1200 lbs
- 1300 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Maintenance Schedule
- Q&A: Upgrading from 1,200 lb Tongue Weight Fastway Weight Distribution to 1,400 lb Equalizer
- Q&A: Equalizer Weight Distribution System Recommendation for Trailer with 1,100 lbs Tongue Weight
- Q&A: Is the Equal-i-zer 14K Weight Distribution System Too Much for a 7,500 lb - 8,000 lb Trailer
- Q&A: Equalizer Recommendation for Trailer that Weighs 10-11k When Loaded
- Q&A: Will 1,400 lb Equal-i-zer Weight Distribution Hitch Work For 750 to 800 lb Tongue Weight
- Q&A: Longer Weight Distribution Shank for Helping with Tailgate Clearance
- Q&A: Recommended Equal-i-Zer Weight Distribution System for Trailer with Close to 1,000 Pounds of TW
- Shop: Trailer Hitch
- Search Results: equalizer 1400
- Video: Choosing the Right Trailer Wiring
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Search Results: trailer hitch
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Shop: Brake Controller
- Search Results: hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Roof Rack
- Video: Choosing the Right Brake Controller
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: My Trailer Hitch Doesn't Fit
- Search Results: 90160
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Suspension Enhancement
- Search Results: brake controller
- Video: Curt 4-Pole Flat Trailer Connector Mounting Bracket Review
- Article: Trailer Wiring Diagrams
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End