Will the Chrome Trailer Wheel Center Cap # 319EZ Fit a Wheel With a Center Hole of 3-1/8 Inches
Question:
Checking on 319EZ cap the center hole is 3 1/8inch and want to make sure this cap will fit. Thanks for answering this e-mail
asked by: John P
Expert Reply:
The Chrome Trailer Wheel Center Cap, part # 319EZ, is designed to fit wheels that will have a pilot hole diameter of 3.19 inches. The 3.19 measurement is about 3-3/16 inches. The pilot hole on your wheel would probably measure closer to the 3-3/16 measurement if you measured again using 1/16th inch increments. This would be the correct center cap for your wheel.
The next closest center cap would measure 3.33 inches, which is equal to 3-5/16 inches. This cap would be too big for your wheel.
Product Page this Question was Asked From
Trailer Wheel Center Cap, Chrome, 3.19" Pilot Size
- Wheel Covers Hubcaps
- Center Wheel Caps
- Front and Rear Wheels
- 3.19 Pilot Diameter
- Steel
- Excalibur
more information >
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Can I get Replacement Keys For a Trailer Hitch Receiver Lock?
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Q&A: Availability of Replacement for Trailer Hub/Brake Drum 92865A-1
- Article: Trailer Wiring Diagrams
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: How Long Does it Take to Install Roadmaster Base Plate Kit
- Q&A: When to Replace Dexter Nev-R-Lube Bearings
- Q&A: Recommended 7000lb Leaf Springs To Replace Dexter 072-027-00
- Q&A: Does Solera RV Slide Out Awning Need Clearance Above Awning Rail
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: RV Propane Troubleshooting | Common Propane Issues and How to Solve Them
- Article: Trailer Tire Sizing
- Article: Brake Controller Installation: Starting from Scratch