Troubleshooting Trailer Wiring Functions That Dont Work But Fuses Are Good
Question:
If both are good, what else could it be, have running lights, but no blinker or brake lights
asked by: Ricky
Expert Reply:
First thing you should do at this point is test the 7-way of the wiring harness with a circuit tester part # PTW2993 for voltage on all of the right pins when the taillight signals are being applied. Just like in the video I attached. My theory is it's on the trailer side of the equation and a weak ground.
If the voltage checks out there but the trailer lights still don't function right then the problem is on the trailer wiring. That would mean that problem is either due to a ground issue or a short issue.
Make sure that the trailer side connector are clean and free of corrosion inside and out. The main connector grounds should be attached to clean and corrosion free bare metal surfaces. The light grounds should also be attached to clean and corrosion free bare metal surfaces. If there is anything between a light ground and the metal trailer frame or if the trailer has an aluminum frame, tilt bed, or folding tongue, any of these things can interrupt the ground. Running jumper wires from the light grounds to the main trailer connector ground can help.
If the problem is on the vehicle side then I would first recommend you double check how the harness is installed on your vehicle, make sure all of the connections are good and tight. You should check all towing related fuses and relays as well.
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Products Referenced in This Question
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Module for Air Lift Compressor
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Best Air Bag Suspension (2023)
- Q&A: Can Weight Distribution and Air Bag Suspension Enhancement Work Together and Which to Setup First
- Q&A: Wiring Diagram for the Curt Universal Brake Controller Harness
- Q&A: Determining Correct Replacement Leaf Spring For Trailer W/ 3000lb Axles and 27" Long Springs
- Q&A: Do Hangers Need to be Modified or Replaced When Switching to New Equalizers on Trailer
- Q&A: Will Trailer Ride Suffer From Using Taller Equalizers
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams