Determining Axle Capacity for 2 inch Square Axles
Question:
Thank you for your response. The bolt pattern is five 1/2" studs on a 4.5" bolt circle. The spindles are stepped, 1 3/8" down to 1 1/16". I hope this helps.
asked by: Gary R
0
Expert Reply:
I wish it was possible to know the capacity just off of the info you listed. Square axles don't have standard capacities. You might have best luck if you can get me more info on the hubs of the axle. Like bolt pattern, bearing numbers, etc.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Hub And Drum Recommendation For Standard Axle
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Search Results: hubs
- Q&A: Bearings For Older Trailer Hub 22834
- Q&A: Availability of 5,200 lb Axle With Idler Hubs
- Q&A: Will The In Bed 7-Way Fit On a 2023 Ford F-150 With In Bed Power Outlet?
- Article: Trailer Tire Sizing
- Q&A: How To Tell Apart 5,200 lb, 6,000 lb and 7,000 Axles
- Q&A: Replacement Bearings 2788 and 1779
- Q&A: Replacement Trailer Bearing for L44640
- Article: Most Popular Wheel Bearings
- Article: How to Measure a Trailer Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Printable Trailer Bolt Hole Pattern Template
Gary R.
6/17/2019
Thank you for your response. The bolt pattern is five 1/2" studs on a 4.5" bolt circle. The spindles are stepped, 1 3/8" down to 1 1/16". I hope this helps.