Base Rail Kit for 2019 GMC Sierra 1500 for Husky Sliding Hitch
Question:
Hello again, a few weeks ago I asked what hardware kit I should purchase to mount my Husky 16K roller fifth wheel hitch into my new 2019 Sierra 1500, and I have since purchased the part kits. I am unable to find installation instructions on this fifth wheel, maybe not looking in the right place. Can anyone help me out? I need to know where in the truck bead these rails go, and whether the king pin should be centered on the rear axle, or in front of it. I have scheduled the install for tomorrow morning. Any help would be greatly appreciated. Thank you
asked by: Clement R
Expert Reply:
Husky doesn't give instructions for their universal base rail kits. I recommend using the installation instructions from the Reese Universal Kit # RP30035 since the measurements will be the same. On your short bed truck you will measure 25-1/8 inches from the rear bed edge (not tailgate) to the rearmost point of the rear rail. Then the front rail will be positioned based on the hitch footprint which is the industry standard with the slots 22 inches on center. I've attached a couple photos to assist.
You can use the measurement from this kit for the Husky kit. The biggest issue is making sure the kingpin is directly above the axle or just slightly forward of it.
Product Page this Question was Asked From
Reese Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt
- Fifth Wheel Installation Kit
- Universal
- Above the Bed
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado
- Article: Gooseneck to 5th Wheel Adapters
- Article: 5th Wheel Hitch Installation | The Ultimate DIY Guide
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Will the Adapter Rails for Curt 5th Wheel Hitch's Work With Reese 16K 5th Wheel Hitch
- Q&A: How to Convert a Demco AutoSlide 5th Wheel Hitch to Fit in the Ford Factory Puck System
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Article: Ram Trailer Tow Prep Package
- Q&A: Can Aftermarket Puck System Be Installed on a 2024 GMC Sierra 3500
- Q&A: Gooseneck Hitch Adapter Recommendation for the Demco Fifth Wheel UMS Rail Kit DM8551010
- Q&A: Installing Fifth Wheel Hitch Bed Rails in Truck with Bed Liner