Mounting Hole Spacing on Buyers Products Straight Tongue Trailer Coupler 3370091562
Question:
Which/how many bolts are required. Currently have a 3inch wide channel with 3 bolt holes that are 3inch on center. Used to have a UFP A160 mounted.
asked by: Robert M
1
Helpful Expert Reply:
Buyers Products Straight Tongue Trailer Coupler # 3370091562 should be installed with bolts through all three holes in the channel mount so that it can meet its published weight specs. Two of the holes are spaced at 3-inches on center; the third is spaced at 2-inches. Each of the mounting holes measures 0.562-inch diameter.
expert reply by:
Adam R
1
Product Page this Question was Asked From
Buyers Products Straight Tongue Trailer Coupler - Auto Latch - 2-5/16" Ball - Bolt On - 15K
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2-5/16 Inch Ball Coupler
- Bolt-On
- 15000 lbs GTW
- 3 Inch Channel
- Auto Latch
- Buyers Products
more information >
Continue Researching
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: How to Safely Use the Square Direct Weld Jack TJD-12000SP-R2
- Q&A: Comparing the Square Direct Weld Jack TJD-12000SP-F2 and TJD-12000SP-R2
- Q&A: Are the Trailer Wheel and Tire Combinations Balanced
- Q&A: Replacement Coupler For Boat Trailer Bolt On Surge Coupler Switched to Electric Actuated Brakes
- Q&A: Comparing Demco Channel Tongue Trailer Couplers # DM16080-95 & # DM15931-95
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Can A 5 Bolt Trailer Coupler Be Installed Using 3 Bolts
- Q&A: How to Bleed Brakes With Dexter Zinc-Plated Brake Actuator
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Brake Controller Installation on a Ford Full-Size Van
- Article: Brake Controller Installation on a Full-Size Ford Truck or SUV