Are Universal 5th Wheel Trailer Hitch Installation Brackets Compatible Rails that Run Front to Back
Question:
We have a 2010 GMC Sierra 6-1/2 foot bed, 2500 HD series. We have a used husky super fifth wheel B 1406 hitch. We have everything except the brackets for under the bed. would the L brackets from the RP30035 installation rails kit work? Could we buy just the L brackets if they do, or could we make them if we had the measurements? Our rails run front to back along the side of the bed where yours runs the width of the bed, would the brackets be compatible with ours? thanks
asked by: James F
Expert Reply:
The Reese L-shaped brackets are not compatible with the Husky installation kit you have. The # RP30035 brackets are designed for rails that run side to side in the bed. It is not a good idea to mix underbed bracket and rail manufacturers as a rule because they have not been tested together.
You will either need to get a compatible installation kit for the hitch and rails or a new fifth wheel trailer hitch and installation kit that are all compatible for your 2010 GMC Sierra.
I recommend a custom installation kit, # RP50064-58, because it requires less drilling and the underbed brackets are designed to fit your truck.
For a trailer hitch, you will want one with enough capacity to handle the gross trailer weight and pin weight, but I also recommend going with a round tube slider because they have 12 inches of travel, the most available. For a 16K hitch use # RP30075.
Products Referenced in This Question
Reese 5th Wheel Trailer Hitch w/ Round Tube Slider - Dual Jaw - 16,000 lbs
- Fifth Wheel Hitch
- Sliding Fifth Wheel
- Above Bed Rails
- 4000 lbs Vertical Load
- 16000 lbs GTW
- Double Pivot
- Standard - Double Jaw
- 15 - 18 Inch Tall
- 11 Inch Fore/Aft Travel
- Reese
more information >
Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches
- Fifth Wheel Installation Kit
- Custom
- Above the Bed
- Reese
more information >
Product Page this Question was Asked From
Reese Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt
- Fifth Wheel Installation Kit
- Universal
- Above the Bed
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Do all Fifth Wheel Rails have the Same Dimensions
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Q&A: Recommended 5th Wheel Rails for a 2002 Ram 2500
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado
- Article: Gooseneck to 5th Wheel Adapters
- Article: 5th Wheel Hitch Installation | The Ultimate DIY Guide
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Will the Adapter Rails for Curt 5th Wheel Hitch's Work With Reese 16K 5th Wheel Hitch
- Q&A: How to Convert a Demco AutoSlide 5th Wheel Hitch to Fit in the Ford Factory Puck System
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Q&A: Can Aftermarket Puck System Be Installed on a 2024 GMC Sierra 3500
- Article: Ram Trailer Tow Prep Package