Lippert Components High-Speed Power Stabilizer Jacks Stop Working While Retracting

Question:

When closing up from our first camping trip I put the front leveler up and they folded fine but as they were closing up tight there was a little noise and the power was no more power. When I tried to fold the rear ones up there was no power.

asked by: DeeAnn F

Expert Reply:

In regards to the Lippert Components High-Speed Power Stabilizer Jack like part # LC298707, the first thing I would do is check voltage on your battery to make sure it is above 12.4 volts. If it is not then you have a dead battery and it will need to be charged. If you do have sufficient voltage on the battery then check the circuit breaker between the switch and battery to make sure it has not been tripped. If the circuit breaker is good and you have power leaving this to the switch then you will need to begin looking for breaks on the wires.

I have attached a wiring diagram of the jacks for you as well but let me know if you still need help once the above is completed.

expert reply by: Conner L