Replacement Brake Assembly Backing Plate for Alko Axle on 2013 Coachman Clipper Camper
Question:
I have an alko axle #044 59155 001 0562520 00013 for 2013 coachman clipper. What dexter backing plate assembly do I need?
asked by: Tony R
Expert Reply:
For your 2013 Coachman Clipper I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K # 23-468-469. These self-adjusting assemblies require no maintenance adjustment like your factory brake assemblies did.
If you prefer the original style, then you will use the Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs # 23-26-27. Individually this is # 23-27 and # 23-26 as for some reason their pricing can be different based on supply and demand on a specific part number.
The backing plate is part of the overall brake assembly and not available separately.
Products Referenced in This Question
Dexter Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Dexter Brake Assemblies for 36-19 Assemblies
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Dexter Trailer Brake Kit To Replace Dexter 36-19 Brake Assemblies
- Q&A: Replacement Hub and Brake Assemblies that Fit Sure Trac 3,500 lb Axle
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Recommended Wet Bolt For Center Hole Of The CRE 3000 Equalizer
- Q&A: Replacement Trailer Hub and Drum and Brakes for AL-KO 8490 Axle
- Q&A: Replacement Bolt and Nut for MORryde Wet Bolt Kit part # MR46ZR
- Q&A: How to Initially Adjust the Dexter Nev-R-Adjust Electric Trailer Brakes
- Article: Trailer Tire Sizing
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Choose the Right Trailer Hitch Class