Would Mighty Cord Detachable RV Power Cord # A10-5036EDBK be Too Stiff to Roll Up Easily

Question

Question:

I have a 2016 Thor Windsport 35c. The 50amp power cord that came with the RV gets stiff below 50 degrees Fahrenheit and is extremely hard to roll up for storage after use. How flexible is the A10-5036EDBK cord in cold temperatures?

asked by: Richard K

0

Expert Reply:

For the size of the cable on the Mighty Cord Detachable RV Power Cord # A10-5036EDBK I would not describe it as overly stiff at all. It comes to us wrapped up in a pretty small rolled up shape too. I've handled different versions of this cord and didn't think it was too stiff to roll up at all. It's pretty heavy at 24 lbs but not stiff. Our customers have not reported back any issues with stiffness either.

expert reply by: Jameson C

0

Answer 1

The Valterra Mighty Cord 50' RV Power Cord Extension w/ Finger Grip Handle - 125/250V - 50 Amp #A10-5050EH the hot wires are the 6 gauge and the ground is 8 gauge. I confirmed this with the manufacturer for you, so you will have 3 wires that are…

view full answer...

Answer 2

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 3

Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…

view full answer...

Answer 4

The 15,000 Btu Furrion air conditioner is what I would recommend and what I have on my trailer. Since it is an enclosed trailer I'm guessing you want the manual distribution box. You can choose from the following based on color: -Furrion Chill HE…

view full answer...

Answer 5

Hi Cheryl, The antennas are unfortunately not sold separately so if you're just needing a coaxial connection the Jensen Antenna #44US01R is going to be the right kit for you. You can hang on to extra wiring as a backup incase your current wiring…

view full answer...

Answer 6

The puck feet on the Gen-Y Hitch Gooseneck Trailer Hitch for Dodge Ram OEM Puck Systems #GY83XR is just to help stabilize the ball mount and does not lock into place in the puck. The locking mechanism on top will lock the shank into the gooseneck…

view full answer...

Answer 7

Since you have the older style of motor the correct replacement for you is the Lippert Components Kwikee Step Motor Replacement Kit For Pre-IMGL #LC379608.

view full answer...

Answer 8

The Mighty Cord RV Power Cord #A10-5036EDBK lists the wire gauges as 6 gauge (3 wire) and 8 gauge (1 wire). The 6 gauge wire is used for the two power legs and negative, and is capable of handling 55 amps. The 8 gauge wire is used for the ground.

view full answer...

Answer 9

Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that they're probably…

view full answer...

Answer 10

I do have some of the components that you will need to set your trailer up for a shore power circuit but if install cost is all you are looking for then you would be best off talking with a qualified service center as this is not something we partake…

view full answer...

Answer 11

I reached out to my contact at Equal-i-zer (and Fastway) and he said you can continue using the existing Fastway e2 lift brackets on your trailer with the new Equal-i-zer 1,200 pound Spring Bars #EQ90-01-1299 and Head #EQ90-02-1200. This is not an…

view full answer...

Would Mighty Cord Detachable RV Power Cord # A10-5036EDBK be Too Stiff to Roll Up Easily

Product Page this Question was Asked From

Continue Researching