Anti-Sway Bars for a 2019 Tiffin Open Road Allegro 36 UA

Question:

Website says this kit is not confirmed for the 2019 36UA, any updates...

asked by: Al L

Helpful Expert Reply:

Yes, we do have anti-sway bars for your application. According to my research it looks like your 2019 Tiffin Open Road Allegro 36 UA is built on a Ford F-53 Chassis with the V10. Since this is the case you will want the Front Anti-Sway Bar # RM-1139-148 and the Rear Anti-Sway Bar # RM-1139-149 from Roadmaster. Both of which are catered to the 26K GVWR of your motorhome.

For the rear bar you do need to check to ensure there is enough factory u-bolt available to accommodate the factory nut, washer and 1/2" plate. If you don't have at least 3 threads showing on your factory u-bolts after adding a 1/2" plate then you need the Extended U-Bolt Kit # RM-590050-00.

I have attached a few installation videos for you to check out. We typically don't add parts for motorhomes in our fitguide unless we have confirmed the fit ourselves. Usually the only motorhome we have had issues with sway-bar fits are the Thor Outlaw motorhomes so you should be good to go!

expert reply by: Jon G