Recommended Hubs and Hydraulic Brakes for Timbren 3,500 Pound Axle-Less System # ASR3500S04
Question:
I want to put hydro drum brakes on the 3500 LBS timbren axleless suspension, which drums and backing plates do I need? 5 on 4 3/4.
asked by: Jeff B
Helpful Expert Reply:
For hub drums that will work perfectly with the Timbren 3,500 Axle-Less System # ASR3500S04 referenced in your question I recommend the etrailer.com # AKHD-5475-35-K. These hubs are compatible with the spindles on the Timbren system and their 5 on 4-3/4 inch bolt pattern will fit your existing wheels.
Then for hydraulic brake assemblies that will work with these hubs I recommend the etrailer.com # AKUBRK-35R for the Right Side and # AKFBBRK-35L for the Left Side. These particular assemblies have a free-backing design so that you can back up the trailer without engaging the brakes.
This is all you will need to add hubs and hydraulic brakes to the Timbren System. I have attached a few short video reviews on these products that you can check out as well. I have also attached a link that will take you to our available selection of surge couplers for hydraulic drum brakes that you can look through if needed.
Products Referenced in This Question
Hydraulic Trailer Brake - Uni-Servo - Free Backing - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Free Backing
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-3/4 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Hydraulic Trailer Brake - Uni-Servo - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Single Servo
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Drop - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Dimensions of the Timbren Axle-Less Suspension System # ASR5200S01
- Article: Where to Position the Trailer Axle?
- Q&A: Moving Axles on Travel Trailer to Accomplish Correct Tongue Weight
- Q&A: Can a European 7-Way Trailer Connector be Converted to a U.S. 4-Way
- Q&A: Correct B&W Turnoverball Underbed Gooseneck Trailer Hitch for 2019 Ram 2500 Without Prep
- Article: Gooseneck to 5th Wheel Adapters
- Article: Trailer Tire Sizing
- Article: Trailer Maintenance Schedule
- Q&A: Are Westlake T235/75R15 Radial Off-Road Trailer Tire High Quality
- Q&A: Dimension Drawing for the Timbren Axle-Less Suspension System # ASR3500S05
- Q&A: How To Lower a Trailer 3 Inches
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Wiring Diagrams