What Size Axle Will the Kodiak Disc Brake Kit # K2HR712DS Fit
Question:
i went no if you disk break /K2HR712DS fit on axle 4 inc . thank,s
asked by: Jean
Expert Reply:
The Kodiak Disc Brake Kit # K2HR712DS is compatible with 7,000 lbs axles that have #42 spindles. These spindles use inner bearing # 25580, outer bearing # 14125A, and grease seal # RG06-070. All of these can be found in the bearing kit # BK3-200.
As long as your axle and spindle falls within these parameters then you can definitely use this disc brake kit.
Be sure that you are using an actuator that is compatible with disc brakes.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 14125A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 14125A
- Race 14276
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- TruRyde
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- etrailer
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet and Stainless - 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 7000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Seal for National Seal or Timken Seal 472920
- Q&A: Correct Replacement Oil Seal 225255UC for Ranger Boat Trailer
- Q&A: Parts Needed For Installing Stainless Steel Disc Brakes On a 6,000LB Single Axle Trailer
- Q&A: Replacement Stainless Steel Kodiak Trailer Brake Kit For 6,000LB Axle With 6 On 5-1/2 Bolt Pattern
- Article: Most Popular Wheel Bearings
- Q&A: Availability of Kodiak Disc Brake Kit for 7k Slip Axles with Stainless Calipers
- Q&A: Does Length of DeeMaxx Hydraulic Brake Hose # DE58GR Include Fittings
- Q&A: Replacement Hub and Drum for a Dexter 8-133
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Performance Chips and Modules
- Article: Trailer Hitch Receiver Sizes
- Article: Trailer Wiring Diagrams
- Article: How Long Can You Boondock in an RV?