How to Choose Replacement Bearings and Seal for Utility Trailer
Question:
Trying to replace the bearings on a utility trailer and the bearings do not have part numbers on them.
asked by: STEVE W
Expert Reply:
I wish I could tell you based off of the picture you sent in what bearings work with your spindle but if you don't have numbers on your bearings then the next best thing is to take a digital caliper and measure where each of the bearings and the grease seal sit on the spindle to the 3rd decimal (for example 1.234).
Replacement bearings and seals need to fit exact which is why it is important to use either the part numbers or the caliper. If you know the weight rating of your trailer axle that can help too as there are typical bearing/grease seal fits but it isn't always a guarantee.
I have attached a photo showing where you need to measure on your spindle as well as a link to our selection of bearings and seals that you can filter through. If you let me know what those measurements are I can help you find the correct replacements.
One other thing you may want to consider is changing out your spindle as well. From the picture you sent in it has seen better days and if there are any grooves, dents, or chips where the bearings or seal rides then that can cause premature wear for a few different components.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Washer For 1" Spindle
- Shop: Trailer Spindle Nut 1"
- Shop: Replacement Trailer Hub Bearing - L68149
- Search Results: trailer bearing washer
- Search Results: tang washer
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Replacement Flat Washer for Demco Kar Kaddy X Towing Deck - 3/4"
- Shop: Wheel Cover
- Video: Adco RV Covers - Tire and Wheel Covers - 290-3952 Review
- Video: Bearing Repacking and Grease Seals Installation
- Q&A: How Much Grease is Needed in an EZ Lube Axle
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Search Results: sw1000
- Search Results: castle nut
- Search Results: 171255tb
- Search Results: l44649
- Search Results: rg06~050
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Q&A: Benefits of Switching to Trailer Tires with Higher Load Range and Speed Ratings
- Q&A: Speed Rating of Tire on Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel
- Q&A: Proper PSI For Pontoon Trailer Tires in Warm Weather
- Q&A: Recommended Air Pressure for Kenda 205/65-10 Bias Trailer Tire
- Q&A: Do Speed Ratings of Trailer Tires Vary Based on Tire Size
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK1-150 Review