Parts Needed to Install Tekonsha P2 Brake Controller in 2005 Toyota Tundra and 2008 Toyota Sequoia
Question:
I would like to be able to transfer this unit back and forth between the two vehicles in the subject line. The Tundra came from the factory with a tow package. The Sequoia did not. The Sequoia has an aftermarket tranny cooler, receiver and a four pin connector at the back which was installed by the previous owner. What else do I need to be able to accomplish this? Thank you
asked by: Don T
Expert Reply:
First thing you'll need is a second mounting bracket for the P2 part # 90885. For that you'll want the part # 7686 which is designed for easy removal of the controller as needed. To install this controller in the 2005 Toyota Tundra requires just the install harness part # 3040-P.
From the 4-way you have in your 2008 Sequoia you would need to convert it to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well. This adapts the 4-way to a 7-way and comes with everything needed to also install the brake controller.
When it comes time to switch the controller from one vehicle to other all you have to do is unplug the harness at the back of the controller and slide it out of the mounting pocket.
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Toyota and Lexus
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Mounting Pocket for Tekonsha Prodigy Proportional Brake Controller
- Accessories and Parts
- Trailer Brake Controller
- Mounting Hardware
- Brackets
- Tekonsha
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Article: Most Popular Wheel Bearings
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Parts Needed To Install A Brake Controller On A 2023 Freightliner Cascadia
- Q&A: Parts Needed to Install 7-Way/4-Way on 2024 Kia Telluride with LED Taillights
- Q&A: How do I Tell if the Brake Controller is Bad
- Q&A: How Is Spring Bar Tension Set Up with Trailer Weight Distribution System