Axle Replacement Recommendation for 2011 PJ Tilt Trailer with 3,500 lb Axle

Question:

Hello, Im looking to replace one axle on a 2011 PJ tilt deck with 3,500 pound axles, 10inch x 2.25inch brakes. The axles on this trailer match all the measurements for the 7359765, and the bearing numbers are the same. The only difference I see is that the original axle appears to be a different style of easy lube or another brand of axle all together? The grease zerks on my spindles are offset and the axle nut is locked with a cotter pin. My question is, can I use this axle beam, reuse my hubs and brakes, and just get the proper axle nut with the push on retaining clip?

asked by: Greg C

Expert Reply:

Yes, you can use the Dexter Trailer Axle Beam with E-Z Lube Spindles # 7359765 as a replacement for what you have. This actually comes with it's own lock washer and nut too so you wouldn't have to try and reuse what you have or source a new setup all together. Your current hub/drums and assemblies will easily transfer to this.

expert reply by: Jameson C