Replacement Wheel Bearings for 2006 Keystone Zeppelin 241
Question:
I have a Zepplin 241 2006 Keystone trailer and I need to get some new bearings for it for they are bad. There is no number on these bearings to figure out which ones I should order, is there a way you can help. Thanks
asked by: Dave B
Expert Reply:
To determine the correct inner and outer bearing, race and grease seal needed, you will need to take some accurate measurements from the spindle. If you will look at the diagram of the spindle on the right, we will need the B, C and D dimensions. In order to get an accurate measurement, you will need to use a digital caliper, a tape measure will not be accurate enough. With this information, we can get you the replacement bearings, races and seals you need.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Trailer Tire Sizing
- Q&A: Best Trailer Hitch for a Bike Rack on a 2024 Toyota RAV4 Prime
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Hub/Drum for Triton Axle 08353
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Q&A: Do Hub Races Have to Be Replaced Each Time Bearings Are Changed
- Q&A: Availability of ST205/75R14 Trailer Tires In a Load Range E or F
- Article: How to Raise Your Travel Trailer Height
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Measuring a Trailer Tire