How to Find Correct Wheel Bearing Kit
Question:
Im looking for wheel bearing kits for an EZ Loader trailer. Model # 3-TEZB23-25/27 6800. Also, which Bearing Buddy would work on that?
asked by: Mark D
Expert Reply:
I can help you find out exactly how to determine the correct wheel bearing kit for your trailer. To do this you should take apart your hub assembly and looking at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper to measure your spindle to the thousandths of an inch where the bearings ride. You can use the photo I've attached to see exactly where you need to measure.
I've also added a link to a help article on common bearing sizes, as well as a link to our available bearing kits.
The Bearing Buddy will depend on the size of your hub bore for example, Bearing Buddy Bearing Protectors # BB1980A-SS will fit a 1.980" hub bore. I have added a link to each of our Bearing Buddy Protectors for you to take a look at as well.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing LM67048 and 25580
- Race 25520 and LM67010
- 5200 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Solution for Atwood Surge Brake Coupler Needing Replacement Parts
- Q&A: Replacement Leaf Spring for Trailer with Dexter 4,400 lb Axle
- Article: Pintle-Hitches
- Article: Trailer Wiring Diagrams
- Q&A: How to Determine the Correct Replacement Bearings for a Trailer
- Q&A: Does The etrailer Invisible Base Plate Kit # e86YR Need An Adapter For A Blue Ox Aventa II Tow Bar
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: How to Charge a Trailer Battery Through a 7-Way Connector
- Q&A: Can I Charge My Trailer Battery Using 7-Way Trailer Connector on Truck
- Article: Big Truck Big RV
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub