NC Error Message on Tekonsha Prodigy Brake Controller but Trailer Brakes Work Fine

Question:

Prodigy brake controller NC shows continuously ,whether trailer is hooked up or not . Hooked up second trailer problem still same. Strange thing is the brakes work perfectly on both trailers. NC stays on continuous

asked by: Steve

Expert Reply:

The issue you are experiencing with your Tekonsha Prodigy Brake Controller is rather common when maintenance or repair work has been performed on the tow vehicle which resulted in the battery being disconnected. The controller will then display an NC continuous error message due to a disconnect in programming. The only thing you will need to do to fix this is unplug the brake controller, wait about two minutes, and then plug it back in. If this does not fix the error you are having with your brake controller then please let me know and I would be glad to offer additional troubleshooting advice.

expert reply by: Conner L