Should 2019 Cyclone 4005 with Triple Axles be Fully Loaded when Installing Comfort Ride Shock Kit
Question:
My question is about the Roadmaster Comfort ride shock system. My camper has a GVWR of 20,000 lb. Dry it weighs 16,290 lb. That is a difference of 3,710 lb. Therefore changing the height of the camper between loaded and unloaded. These shocks are to be installed when the wheels are on the ground. The shocks come with restraint wires and are to be installed with these wires still on which partially compressors these shocks for installation. My question is should the shocks be installed when the camper is fully loaded at 20,000 lb or should they be installed when it is at a dry weight of 16,290 lb since this will change the travel distance of the shocks and the mounting position to the frame?
asked by: Steve H
Expert Reply:
What you want to do is load your trailer about halfway so that your suspension will be sitting in the middle of fully loaded and dry for installing the Roadmaster Comfort Ride Shock Absorbers # RM-2460. I confirmed this with my contact at Roadmaster.
Please note that since you have a triple axle trailer you also need the Add-On Kit # RM-2460-50.
Attached is a review video and the written installation instructions for you to check out.
Products Referenced in This Question
Roadmaster Comfort Ride Add-On Kit for Triple Axle Trailers - 5,200-lb to 7,000-lb Axles
- Trailer Leaf Spring Suspension
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Shocks
- Round Axle - 3 Inch
- Triple Axle
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 5,200-lb to 7,000-lb Axle
- Trailer Leaf Spring Suspension
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Shocks
- 6000 lbs
- Round Axle - 3 Inch
- Tandem Axle
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Suspension Enhancements for a 2022 Grand Design Imagine 2910BH
- Article: Using a Portable Generator on RV
- Q&A: Dimensions of Tie and Shock Extension Plates for Clearance on the Comfort Ride Shock Absorbers
- Q&A: Can Roadmaster Comfort Ride Leaf Spring Suspension Kit replace MORryde LRE Suspension Kit
- Q&A: Longer U-Bolts For 3 Axles For Roadmaster Roadmaster Comfort Ride
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Recommended Roadmaster Comfort Ride Leaf Spring Suspension Kit for 2020 Winnebago Voyager 2427RB
- Q&A: Will Roadmaster Comfort Ride Improve Ride of 2021 Grand Design Reflection 303RLS
- Q&A: Does Roadmaster Comfort Ride System Provide Better Ride Quality than Most Trailer Shocks
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Trailer Tire Sizing
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review