How to Pick Out Replacement Hub For 1997 Triton Lite Snowmobile
Question:
Do you have a 5 hole idler hub for a1997 Triton Lite snowmobile trailer? The trailer is 96 inches wide, 10 feet long, and has a weight limit of 1880 pounds:
asked by: Jim F
Helpful Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Replacement 8" X 7" Galvanized Trailer Wheels With 5 On 4-1/2" Bolt Pattern and 18.5/8.5-8" Tires
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Article: Most Popular Wheel Bearings
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range D
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Search Results: ce13311
- Search Results: spindle nut washers
- Search Results: hubs
- Search Results: rim
- Search Results: am3h290
- Search Results: safety chains
- Search Results: castle nut washer
- Q&A: Which is a Better Wheel to Use in Saltwater - Steel, Galvanized, or Aluminum
- Shop: ProGrip Ratchet Tie-Down Straps - Double-J Hooks - 1-1/4" x 12' - 1,000 lbs - Qty 2
- Video: etrailer Trailer Jack - Side Frame Mount Jack - TJP-5001S-B Review
- Video: Review of Hydrastar Trailer Brakes - Tandem Axle Disc Brake Kit - HSE7K-T1SO
- Article: Trailer Wiring Diagrams
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Can Hub and Brake Drum Be Replaced with Idler Hub on Tandem Axle Trailer
- Q&A: What Grease Does Trailer Hub # AKIHUB-440-2-EZ-2K Come Pre-Greased With
- Q&A: Recommended Hubs for a Snowmobile Trailer With 8 Inch Wheels
- Q&A: Can 20.5x8.5-10 Trailer Tires be Used in Place of 18.5x8.5-8 Tires on Snowmobile Trailer
- Q&A: Replacement Hubs with L44649 Bearings on Snowmobile Trailer