Derale Engine Oil Cooler for 2012 Toyota FJ Cruiser 4x4
Question:
I’m interested in a small engine oil cooler like part# D15602 you sell. Is this something that would fit my fj? I already have a transmission cooler installed. Regards.
asked by: Luis
Expert Reply:
Yes, you can use Derale Oil Cooler kit # D15602 in your FJ Cruiser.
A supplementary oil cooler like the Derale # D15602 is a great way to keep your engine oil temperature in the ideal 180 to 200-degree Fahrenheit range. This Class III cooler kit includes a sandwich adapter and a range of sleeve nuts to ensure a proper match to the threads on your oil filter landing (where your oil filter currently mounts).
The best place to mount the cooler core is in front of your AC condenser where it will receive the most air flow for best cooling efficiency. This will provide an oil temperature reduction of up to 50 degrees which extends the life of your oil between changes. The kit is complete with all connectors, oil lines, clamps and mounting components.
You will just want to make sure that the 2-inches of added depth from the sandwich adapter (which goes in between the filter and the filter mount) will not block removal of the filter for oil changes. This part is shown in the linked photo and it has arrow indicators to show you which of the ports is for input and output. You may find you need to add a bit more oil at your next oil change to account for the additional fluid volume capacity of the oil lines and adapter, perhaps a couple of ounces at most.
The written instructions for this kit are linked for you.
Product Page this Question was Asked From
Derale Stacked-Plate Engine Oil Cooler Kit w/ Sandwich Adapter (Multiple Threads) - Class III
- Engine Oil Coolers
- Stacked-Plate Cooler
- W/ Sandwich Adapter
- Class III
- 13W x 4-9/16T x 2D Inch
- With - 8 AN Inlets
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Derale Stacked-Plate Engine Oil Cooler Kit w/ Sandwich Adapter (Multiple Threads) - Class III
- Shop: Transmission Cooler
- Shop: Derale Low-Profile Sandwich Adapter - 20 mm x 1.5 mm Engine Filter Threads
- Q&A: Recommended Oil Cooler for a 2005 Chevy Trailblazer 4.2 Liter I-6 Engine
- Shop: Suspension Enhancement
- Search Results: engine oil coolers
- Search Results: gas can mount
- Shop: Quick Fist 3" Clamp - 2-3/4" to 3-1/4" Inner Diameter - Rubber - 50 lbs
- Shop: Quick Fist Mini Clamps - 5/8" to 1-3/8" Inner Diameter - Rubber - 25 lbs Each - Qty 2
- Q&A: What Is the Difference Between the Derale Stacked-Plate Engine Oil Cooler Kit D15602 and D15605
- Video: Derale Engine Oil Coolers D25772 Review
- Shop: Tow-Rax Aluminum Storage Cabinet w/ Folding Tray - 22" Tall x 12" Wide - Machined Finish
- Shop: Rack'Em 2.5 Gallon Gas Can Rack for Enclosed Trailers
- Shop: Derale Stacked-Plate Engine Oil Cooler Kit w/ Sandwich Adapter (Multiple Threads) - Class III
- Q&A: Do Any Factory OEM Components Need to be Replaced to Install Engine Oil Cooler # D15602
- Q&A: Is Vehicle Engine Oil Being 225 Degrees Safe
- Q&A: Does Derale Stacked Plate Oil Cooler Kit # D15602 Come with Thermostat Bypass
- Q&A: Does Derale Stacked-Plate Engine Oil Cooler # D15602 Have to Install Upright
- Q&A: Recommended Engine Oil Cooler 2009 Chevy Silverado 1500 4.8L V8
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Search Results: air bags
- Search Results: timbren
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Shop: Trailer Wiring
- Video: Air Lift LoadLifter 5000 Ultimate Rear Air Helper Springs with Internal Jounce Bumpers Review
- Search Results: transmission coolers
- Shop: Brake Controller
- Article: Stability Control for Heavy Duty Vehicles
- Shop: Towing Mirrors