Longest Weight Distribution Shank for a Husky Center Line Weight Distribution System
Question:
I have a 2017 F250 and need a longer shank to gain greater separation btw truck and trailer to be able to open tailgate when hitched up and more than my current shank to get trailer leveled. Is this shank compatible the hole measurements and size are the same, but is there anything Im missing.
asked by: Chris
Expert Reply:
Yes, the Curt Weight Distribution Shank part # 17120 will work with your Husky Center Line Weight Distribution System. Almost all of the weight distribution system shanks we carry are universal. It will provide you with 10" from the center of the pin hole to the center of the adjustment holes and up to a 5-3/4" drop for trunnion bar systems.
If you instead need something even longer, we have the Equal-i-zer Weight Distribution Shank part # EQ90-02-4600 which measures about 14-1/2" from the center of the pin hole to the center of the adjustment holes and up to a 4" drop for trunnion bar systems.
Products Referenced in This Question
Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1600 lbs TW
- 16000 lbs GTW
- Fits 2 Inch Hitch
- Equal-i-zer
- Square - 4 Inch Drop
- Square - 8 Inch Rise
- Equal-i-zer
more information >
Product Page this Question was Asked From
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 6 Inch Drop
- Trunnion - 5 Inch Drop
- Round - 10 Inch Rise
- Trunnion - 9 Inch Rise
- CURT
more information >
Continue Researching
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Shop: Replacement Thumb Turn Cam Latch Cylinder - Stainless Steel - 1-1/8" Long
- Search Results: weight distribution shank
- Shop: Curt Weight Distribution Shank for 2" Hitches - 3-1/8" Drop - 7-1/8" Rise
- Q&A: Extended Shank for a Weight Distribution System
- Q&A: Longest Shank for Weight Distribution System
- Q&A: What is the Purpose of the 2 Hitch Pin Holes on the Reese Weight Dist Shank # RP54970
- Q&A: Recommended 2-1/2 Inch Weight Distribution Shank for 1400 lb Equal-I-zer Weight Distribution System
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Reese Weight Dist Shank - 12-1/4" Long - 2" Drop to 6-1/2" Rise - 1,500 lbs TW
- Shop: Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Search Results: 44649
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: 68149
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Shop: Trailer Wiring
- Video: etrailer Class III Trailer Hitch Installation - 2016 Jeep Cherokee
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Shop: Fifth Wheel Hitch
- Video: Lippert Solera Slider Slide-Topper Review
- Search Results: 25580
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: dust cap
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Video: Choosing the Right Brake Controller
- Shop: Brake Controller