Recommended Anti-Sway Bars for Ford F53 Chassis on 2018 Thor Hurrican 29m Motorhome
Question:
We have a 2018 Thor Hurricane 29m. looking for front and rear sway bars. can I install them myself? Does the RV need to be lifted off the ground with a hoist? thanks
asked by: Nyles G
Expert Reply:
Your 2018 Thor Hurricane 29M is built on a Ford F53 Chassis and has a GVWR of 18,000 lbs. For this motorhome I recommend starting with the Roadmaster Rear Anti-Sway Bar for Motorhomes # RM-1139-146 because the rear sway bar has the most impact on the overall driving of the vehicle. You do not need to use a hoist to install the bar, but you will be removing a shock, so it will be much easier if you have a free moving axle, but it is not an absolute requirement. It is not a difficult installation, so you can do it yourself if you have the ability to lift the axle or compress the shocks.
Next, I recommend the Roadmaster Front Anti-Sway Bar for Motorhomes # RM-1139-148. This installation is even easier and doesn't require lifting the axle at all.
Finally, I also recommend the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK22-RSSA. This doesn't help with the body roll like the anti-sway bars, but focuses on keeping the steering centered to provide a better driving experience with less driver fatigue. This helps reduce the impact of crosswinds, rut tracking, road edging or a tire blowout. This can also be installed without a hoist and will take about an hour to install.
I recommend starting with the rear anti-sway, then adding the front anti-sway, and finally adding the steering stabilizer if you need to install them in a sequence.
Products Referenced in This Question
Roadmaster Front Anti-Sway Bar - 1-3/4" Diameter
- Anti-Sway Bars
- Anti-Sway Bar
- Front
- 1-3/4 Inch Diameter
- Steel w Polyurethane Bushing
- Roadmaster
more information >
Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes
- Anti-Sway Bars
- Steering Stabilizer
- Includes Mounting Hardware
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Rear Anti-Sway Bar - 1-1/2" Diameter
- Anti-Sway Bars
- Anti-Sway Bar
- Rear
- 1-1/2 Inch Diameter
- Steel w Polyurethane Bushing
- Roadmaster
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Q&A: AxleTek Brake Assembly Recommendation for 8k Axles with 4 Bolt Mounting Pattern
- Article: Stability Control for Heavy Duty Vehicles
- Q&A: Recommended Spare Tire Cover for 265/70R17 Size Tire
- Q&A: Replacement 7-Way Wiring Harness for 2005 Ford F-150 with Factory Tow Package
- Q&A: Torque Specifications for Rear U Bolts on F53 Chassis Motorhome
- Q&A: Recommended Anti-Sway Bar, Steering Stabilizer, and Air Bags for 2018 Thor ACE 30.3
- Q&A: Raising Trailer with Welded On Torsion Axles
- Article: Trailer Wiring Diagrams
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Components of Firestone Air Suspension Systems
- Article: Replacement Automotive Lighting
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer