Do Bearings Need to be Pressed Out or Can a Hammer be Used to Remove Them
Question:
I would like to know if a never lube bearing needs to be pressed out or if it could be hammered out?
asked by: Mike
0
Expert Reply:
You should never use a hammer to drive out your bearings as that could damage the bearings and the inside of your hub. If you are going to be replacing your bearings then you don't have to be as careful with them but they should just fall out of the hub after you take it off of your spindle.
We have a wide variety of bearings, races, seals, and bearings kits that you can use for replacements. I have linked the page to this answer page for you to filter through.
expert reply by:
Jon G
0
Product Page this Question was Asked From
50MM Nev-R-Lube Bearing for 8,000-lb Dexters - Qty 1
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 50 MM I.D.
- Bearing 31-71-3
- 8000 lbs Axle
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Is Visible Grease and Inner Race movement Normal for 50MM Nev-R-Lube Bearing
- Q&A: Procedure for Replacing 31-71-3 50mm Sealed Nev-R-Lube Bearings
- Q&A: Replacement Nev-R-Lube Bearings for 8 on 6-1/2 Inch Bolt Pattern on 2001 Sooner Royale Horse Trailer
- Q&A: Nev-R-Lube Bearings for 8K Capacity Axle
- Q&A: Socket Size Needed to Remove and Re-Torque Nut for Replacing Nev-R-Lube Bearing
- Shop: 50MM Nev-R-Lube Bearing for 8,000-lb Dexters - Qty 1
- Q&A: Who is the Bearing Manufacturer for the Nev-R-Lube 50mm Bearing Part # 31-71-3
- Q&A: How Often Do Trailer Wheel Bearings Need to be Greased
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Brake Controller
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Shop: Gooseneck Hitch
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 8K
- Shop: Nerf Bars - Running Boards
- Shop: Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009
- Shop: Vehicle Tow Bar Brake System