How to Determine the Best Weight Distribution With Sway Control for Trailer
Question:
Need some help swayI loaded my trailer up with 3 quads standing up and started getting alot of trailer sway and some bouncing
asked by: Jimmy
Expert Reply:
Since you are having difficulty with sway I strongly recommend a weight distribution system with sway control. In order to choose the best weight distribution system for your trailer with three quads on it, you will first need to know your total tongue weight (TTW), which is the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your tow vehicle.
The tongue weight is typically between 10% and 15% of your trailer's GVWR but you'll want to verify it by using a scale such as the etrailer # e99044 or by using one of the methods outlined in the help article on determining tongue weight I've linked for you.
From there, simply add on the weight of the cargo behind the rear axle of your tow vehicle and you'll have your TTW. The ideal system would be one in which your TTW would fall somewhere in the middle of the weight distribution system's tongue weight capacity.
For example, if your TTW was 750 lbs I recommend the Fastway e2 Weight Distribution System # FA92-00-1000 which is for TTW between 600 lbs and 1,000 lbs. If you let me know what your TTW is I would be happy to make a recommendation for you so you can get the correct system.
I have also linked our entire selection of weight distribution systems with sway control for you to check out.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 20,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 20000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Tongue Weight Scale
- Analog Scale
- 2000 lbs
- etrailer
more information >
Thin Walled Socket for Equal-i-zer Hitches
- Accessories and Parts
- Weight Distribution Hitch
- Tools
- Socket
- Equal-i-zer
- Equal-i-zer
more information >
Product Page this Question was Asked From
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 800 lbs
- 900 lbs
- Fastway
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Correct Weight Distribution Hitch for Trailer With 7,000 lb GVWR
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Article: Determining Trailer Tongue Weight
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Recommended Roof Coating For EPDM Roof Membranes
- Article: Components of Firestone Air Suspension Systems
- Q&A: Can Curt TruTrack 2P be Used with 8k Trailer
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Best RV Roof Coating That Helps Protect Against UV Rays And Reflect Heat
- Q&A: Weight Distribution Hitch Recommendation for 7,000 lb Trailer
- Q&A: Which Roadactive Suspension Kit Fits 2023 Ford F-150
- Q&A: Will the Dometic FanTastic Ultra Breeze Trailer Roof Vent Cover Fit a MaxxFan