How to Remove Synthetic Rope on the Bulldog Winch Powersports Series ATV Winch # BDW15014
Question:
Hi, I was looking at one of your bulldog electric winches specifically: Bulldog Winch Electric Winch - BDW15014 and had a couple questions. Rope Length: I was looking for a rope winch with at least 100 ft of winchable rope length. That seems to be governed by how much of the thickness of rope can fit on the spool as well as the desired winching capacity. I was wondering how difficult it would be to swap out the thicker rope that comes with the winch and put in a thinner gauge rope. The pulling capacity for my application is not large and only requires about 200-250 lbs winching capacity. Thank you for your help!
asked by: Joseph P
Expert Reply:
I spoke with my contact at Bulldog Winch who said that removing the synthetic rope on the Bulldog Winch Powersports Series ATV Winch # BDW15014 is actually very easy. Simply run the rope all the way out and then there is a set screw that holds it in place.
You can run the rope out via free-spool or the power but it would be much quicker to run it out with the free-spool feature.
I'm not sure what your application is but you should be mindful that each time there is a layer of rope on the drum it does reduce the capacity. Since this is really only meant to be used with a 50' long rope you may consider using a different winch like the Standard Series Off-Road Winch # BDW10044 instead as it comes with 100' of synthetic rope.
Products Referenced in This Question
Bulldog Winch Standard Series Off-Road Winch - Synthetic Rope - Hawse Fairlead - 8,000 lbs
- Electric Winch
- Truck Winch
- Recovery Winch
- Jeep Winch
- 3-Stage Planetary Gear
- 5.0 HP
- 6001 - 8000 lbs
- 51 - 60 lbs
- Medium - 5 to 9 fpm
- Plug-In Remote
- Synthetic Rope
- Bulldog Winch
more information >
Product Page this Question was Asked From
Bulldog Winch Powersports Series ATV Winch - Synthetic Rope - Hawse Fairlead - 2,500 lbs
- Electric Winch
- ATV - UTV Winch
- 3-Stage Planetary Gear
- 1.0 HP
- 2001 - 4000 lbs
- 11 - 20 lbs
- Medium - 5 to 9 fpm
- Plug-In Remote
- Synthetic Rope
- Bulldog Winch
more information >
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Will Superwinch Terra Series ATV Winch fit a 2013 Yamaha Grizzly 550 EPS ATV
- Q&A: Troubleshooting Brake Lights On After Breakaway Switch Pin is Replaced on 5th Wheel Trailer
- Q&A: Replacement Trailer Bearing for L44640
- Article: Pintle-Hitches
- Q&A: Spare Wheel and Tire for Aluma Trailer 6310H
- Q&A: Replacement 7 Spoke Aluminum Trailer Wheel for Aluma Trailer
- Q&A: Typical Trailer Lug Nut Diameter and Thread Pitch
- Q&A: Recommendation for Quiet Electric Winch to Use Indoors
- Article: Replacement Automotive Lighting