Manually Retracting Jack on Lippert Ground Control 3.0

Question:

Excessive angle won’t allow left front jack to raise. Is there a way to raise it manually. We can’t hook up our fifth wheel.

asked by: Patsy L

Expert Reply:

There is a way to manually retract the jacks on your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC358590.

I have cut out a portion of the directions which goes over what you need to do:

Top of Jack Motor Override:
Tools needed:3/8” drive ratchet and extension (no socket)
1. Find the port on the top of the jack motor
2. Remove the rubber plug
3. Insert the 3/8” drive into the port
4. Turn override until the jack extends or retracts to desired position.

Bottom of Jack Motor Override:
Tools needed:3/8” drive ratchet and extension, 5/16” socket
1. Find the port on the bottom of the jack motor
2. Remove the rubber plug
3. Insert the 5/16” socket into the port
4. Turn override until the jack extends or retracts to desired position.