Reese Strait Line Weight Distribution System Recommendation for 2017 Impact Toyhauler
Question:
I have 2018 chevy 2500hd crew cab. My trailer is 2017 impact toyhauler. Tongue weight is 1200 and weight of the camper is 12000lbs. Mostly just carry a eletric golf cart in it. Looking to get reese straight line but should I go for 1200 or 1500lb? Or is there a better option hitch with sway control.
asked by: Brian
Expert Reply:
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
Since your tongue weight is 1,200 lb the Strait Line system you'd need is the # RP66130 which is rated for up to 1,500 lb tongue weigh. For a shank we have the part # RP54970 which fits a 2 inch trailer hitch and for a hitch ball we have the Curt ball part # C40030.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 15,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 15000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Reese Weight Dist Shank - 12-1/4" Long - 2" Drop to 6-1/2" Rise - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 2 Inch Drop
- Trunnion - 1 Inch Drop
- Round - 5 Inch Rise
- Trunnion - 6 Inch Rise
- Reese
more information >
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 15K GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- Reese
more information >
Product Page this Question was Asked From
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 15K GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Can Blue Ox SwayPro Weight Distribution be Used With Equal-i-zer Weight Distribution Shank
- Q&A: Is There a Trailer End 4-Round With Wires
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Tongue Weight Capacity for a 2020 Chevrolet Silverado 2500
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Will 18" Long Equal-i-zer Weight Dist Shank Reduce Tongue Weight Capacity
- Q&A: Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Q&A: Will Reese Weight Distribution System RP66131 Work for Trailer with 1,350 lbs Tongue Weight
- Q&A: Will Lift Bracket RP6637 and Chains 3216 Fit on Pro Series RB3 Weight Distribution System