Standard Grease/Dust Caps Won't Fit Hubs on Trailstar Boat Trailer
Question:
i have a trailstar boat trailer and the hub measurement inside with a caliper is 2 inches. i cannot find a proper fit cap for this trailer. can you help.
asked by: Clyde N
Expert Reply:
It sounds like your trailer has the stubby spindles on it that are usually associated with boat trailers. It is possible that you will need a special dust cap to fit it if there isn't enough space for a standard one (the trailer manufacturer should be able to direct you to the best option). But there is another possible solution. If you can tell me the diameter of the wheel center pilot hole I can see if center cap is available.
There are Bearing Buddies, # BB2047 or # BB2047SS that are slightly larger than 2 inches (2.047 inches) that could potentially work for you. Grease cap diameters are normally slightly larger than the hub bore so that could be another reason why you can't find a standard fit.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 2047 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.047 Inch
- Bearing Buddy
more information >
Bearing Buddy Bearing Protectors - Model 2047SS - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.047 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Grease Cap, 1.988" OD Drive In - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings
- Shop: 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Search Results: trailer lights
- Video: Review of etrailer 2 Leaf Slipper Spring - e36SR
- Q&A: Replacement Grease Cap Plug for a Tracker Boat Trailer
- Shop: Grease Cap Plug for E-Z Lube Grease Caps - Qty 2
- Search Results: trailer roller
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: Stainless Steel Hex Lag Screw - 3/8"
- Q&A: Replacement Grease Cap Plugs For Super Lube Axles On a 2003 Trailstar Boat Trailer
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer
- Q&A: How to Measure a Trailer Hub for the Correct Size Grease Cap for a 1993 Coleman Pop-up Camper
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Video: Review of Trailer Leaf Spring Suspension - Spring Mounting Hardware - 166079
- Video: Review of DeeMaxx Trailer Bearings Races Seals Caps - Stainless Steel Grease Cap with Plug - DE79YR
- Video: TruRyde E-Z Lube Grease Caps Plug Review
- Video: TruRyde Trailer Bearings Races Seals Caps - Caps - DC200L-DCRP Review
- Article: Measuring a Trailer Tire
- Q&A: How to Measure Trailer Leaf Spring to Find Correct Replacement
- Video: Dexter Nylon Suspension Bushing Installation
- Shop: DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug - 1.98" Outer Diameter
- Video: Titan Chain Safety Chains and Cables - Safety Chains - TCTSCG30-5548-04X2 Review
- Search Results: grease plug
- Search Results: grease cap 2.44
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Search Results: leaf spring
- Search Results: safty chains
- Search Results: trailer leaf springs