Tongue Weight of Titan Hitch Box Extension at 48 Inches

Question

Question:

So if my hitch is rated at 1K tongue weight, I can have 500lbs of tongue weight with the full 48 inch extension 50? Just want to confirm...thanks.

asked by: Wayne

0

Expert Reply:

The tongue weight capacity of the Titan Hitch Box Extension for 2-1/2" Trailer Hitches # RP45018 at the full 48" extension would actually be 400 lbs.

It would be 500 lbs if you cut the extension down to 41".

expert reply by: Kyle S

0

Answer 1

The trailer hitch on the truck is what supports the extension. The extension is designed to fit in a 2-1/2 inch receiver (measuring on the inside) and the receiver part of the extension has a 2 inch receiver opening. The only thing you need for the…

view full answer...

Answer 2

The Titan Hitch Box Extension for 2-1/2 inch Trailer Hitches, item #RP45018, has two different ratings because if towed with a weight distribution system (see link) you will be able to tow higher capacities. If the extension is used as a weight…

view full answer...

Answer 3

I recommend using the 48" Long Safety Chain with 1/4" S-Hook #TCTSCG30-748-04x2 with the Reese Titan Hitch Box Extension #RP45018. This chain includes s-hooks with built in latches on both ends of the chains that will allow you to easily…

view full answer...

Answer 4

When using an 18 inch long hitch extender like the Curt #C45796 you can certainly use two sets of chains like you mentioned, one set from the truck to the extender's receiver and one from the receiver to the trailer. Technically only the chains…

view full answer...

Answer 5

A good option for a safety chain for use with Titan Hitch Box Extension #RP45018 is the Laclede Chain Safety Chains and Cables, part #2118-348-04. These offer a minimum breaking strength of 5000-lbs and are USA-made.

view full answer...

Answer 6

Using a hitch extender is safe as long as you stay within the limits specified of 50 percent of the hitch and vehicle load capacity, and 350 lb tongue weight capacity of part #HE06. The other option to provide additional clearance from your spare…

view full answer...

Answer 7

For a hitch extension that long you'd have to have a 2-1/2 inch hitch installed on your 2005 GMC Sierra 2500 like the Curt part #C15703 which is a confirmed fit. Once that's installed you'd be able to use a longer extension like the part…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Tongue Weight of Titan Hitch Box Extension at 48 Inches

Product Page this Question was Asked From

Continue Researching