Idler Hub with 5 on 4-1/2 inch Bolt Pattern to Fit 3,500 lb Trailer Axle # 7359765
Question:
Which hubs are compatible with this axle? Idler hubs, 5 on 4 1/2 bolt pattern.
asked by: SHELDON E
1
Helpful Expert Reply:
For an idler hub with a 5 on 4-1/2 inch bolt pattern to fit the trailer axle part # 7359765 you'd want the part # 84545UC1-EZ.
expert reply by:
Jameson C
1
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Q&A: Can 95" Axle With 80" Spring Centers Replace 93" Axle With 78" Spring Centers
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Q&A: Correct Replacement for Quality 3500 Lb 95 HF 80 SC Trailer Axle
- Q&A: Suspension Parts Needed for 3,500 lb Tandem Axles and 29-1/2" Hanger Spacing
- Q&A: Replacement 3,500 Lb Dexter Axle D4518710
- Q&A: Will 95" Hub Face Axle e52SR Work in Place of 93-1/2" Hub Face Axle
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Pintle-Hitches
- Q&A: How to Check for a Bent Trailer Axle Spindle
- Article: How to Measure a Trailer Axle
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Replacement Grease Seals For TRP GS-1719DL