Is it Possible To Determine Replacement Bearings for Trailer without Pulling Hubs Off
Question:
Is there a way to determine what bearings, seals and racers i need without pulling the wheels off. What i want to do is have the parts on hand before i start the inspection for possible replacement. Please keep in mind that this trailer was under cover since 20098 and used about four times a year. we just purchased it and we take long trips so i want to be sure things are in good shape. thanks
asked by: Joseph D
Expert Reply:
If you can find out the brand and capacity of the axle we can most likely tell you what bearings you'd need. Otherwise you'd have to pull the hubs off to get the info.
Typical Axle Diameters Based on Axle Capacity
- 1,000-lb - 2,000-lb Axles: 1-1/2 inch - 1-3/4 inch diameter
- 3,500-lb Axles: 2-3/8 inch diameter
- 6,000-lb - 7,200-lb Axles: 3 inch diameter
- 8,000-lb Axles: 3-1/2 inch diameter
- 9,000-lb Axles: 4 inch diameter
- 10,000-lb Or more axles: 5 inch diameter
I attached a help article on popular bearings for trailers for you to check out as well.
Product Page this Question was Asked From
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: How to Bleed Brakes With Dexter Zinc-Plated Brake Actuator
- Q&A: Bearing Buddy And Spindle Grease Seal For The AKIHUB-545-2-1K Idler Hub Assembly
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Options For Replacing A Tie Down Turbo Lube 48394 Clear Oil Bath Cap
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Replacement Disc Brake Kit Recommendation for 3,500 lb Axle with #84 Spindles
- Q&A: Replacement Grease Seal for GS-1250DL
- Article: Adding Electric Over Hydraulic Disc Brakes