Capacity of Trailer Axle Spindles # TRU57FR and # TRU34FR
Question:
Can you provide the yield strength of the steel used in Spindles TRU57FR and TRU34FR? We need the yield strength to calculated the safety factor in our design.
asked by: Brian H
0
Expert Reply:
The only capacities we have for the two spindles you mentioned is the capacity of them if they are used as they are intended on a trailer axle. The part # TRU34FR is for a 3,000 lb axle so it has a 1,500 lb capacity and the # TRU57FR is intended for a 5,000 lb axle so it has a 2,500 lb capacity.
expert reply by:
Jameson C
0
Products Referenced in This Question
Agricultural Spindle for 3,000-lb Trailer Axles - 1-3/4" Diameter
- Trailer Spindles
- Agricultural Spindle
- 1-3/4 Inch Diameter
- Round
- For 3000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
#42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Is There Kit to Convert 7k Axle from Grease to Oil Bath
- Q&A: Drag Roller Recommendation for Boat Trailer with Prop Protector Cut Out
- Article: Trailer Maintenance Schedule
- Q&A: Brake Bolt Pattern and Stub Diameter for #84 E-Z Lube Spindle for 3,500 lb Trailer Axles
- Q&A: How to Remove a Hub From a Trailer Spindle
- Q&A: Replacement Stainless Steel Kodiak Trailer Brake Kit For 6,000LB Axle With 6 On 5-1/2 Bolt Pattern
- Q&A: Availability of a Replacement Castle Nut for Trailer Spindle
- Q&A: What Is The Tread Size For The # 42 Spindle?
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Lighting Requirements